TSR122038RL TELESCOPIC STRUT REPLACE N-VENT CADDY
Features and Benefits
- Easy "push-to-install" design allows installers to simply push the threaded rod through the mounting hole, instantly holding it in position
- Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
- Standard strut profile runs the entire length of the part, allowing most standard fittings to be placed anywhere between the rods
- Allows installers to prefabricate complex assemblies and quickly lift and lock them into place​
- Lock nut can be finger tightened, locking the rod in place
- Allows for the quick creation, installation, and adjustment of multi-level trapeze assemblies
- Captive threaded nuts enable fastening to threaded rod supports without loose parts
- Integrated ruler displays space between hanger rods in inches and centimeters
- Supports up to seven 2" (50 DN) conduits, six 2" (50 DN) water filled pipes at 10' (3 m) spacing, or up to 18" (450 mm) cable tray
- Conduit can be supported on the top and bottom, eliminating the need for double sided strut
- Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
| General Data | |
|---|---|
| Material | Steel |
| Finish | Pregalvanized |
| Rod Size | 3/8" |
| Thickness | 0.040" |
| A | 12 1/2"- 20" |
| B | 14" - 21 1/2" |
| C | 1 5/8" |
| D | 7/8" |
| E | 1 3/8" |
| Static Load 1 | 300 lb |
| Static Load 2 | 200 lb |
| UPC | 782856916475 |
| Standard Packaging Quantity | 20 |
| Packing Quantity | 1 |